Print | Rate this content

HP Designjet 755CM Printer - Product Specifications

Model numbers

Description
Model number
HP DesignJet 755CM printer
C3198A (E/A0 size)

top

Serial number location

When looking at the front of the printer, the serial number is located directly above the power cord on the left rear panel.

top

Printer description

The HP DesignJet 755CM printer is a large-format, color and monochrome, Inkjet printer that provides hardcopy output of computer program data.

Large-format plots of high resolution and quality are generated for applications such as:

  • Graphics

  • Design

  • Illustration

  • Desktop Publishing (poster-size)

  • Computer-aided design (CAD)

  • Computer-aided manufacturing (CAM)

  • Mapping

  • Mechanical and architectural drawings

  • General drafting

  • Large format printers markets

Graphic languages

The printer accepts data from graphics, CAD, and other software programs supporting the following languages:

  • Adobe (R) PostScript (R) Level 2.

  • Hewlett-Packard Graphics Language (HP-GL), a vector language.

  • HP-GL/2, an enhanced version of HP-GL.

  • Hewlett-Packard Raster Transfer Language (HP-RTL) a raster language.

  • Printer Job Language (PJL).

The printer supports HP-GL/2 with both the Roman and the Japanese Kanji character sets (provided the Kanji ROM SIMM is fitted).

top

Printer features

  • Support for glossy papers and films.

  • Improved print quality, including new print modes that help eliminate banding.

  • Better lightfastness, up to 1 year in typical office lighting.

  • More extensive color management software, including PANTONE (R)* profiles, ICC profiles for Apple ColorSync 2.0, Adobe ink profiles, and AGFA Fototune and Kodak Precision profiles.

  • Preinstalled memory, PostScript, and HP JetDirect card for Ethernet/LocalTalk.

  • Automatic media-edge sensing.

  • Automatic cartridge alignment, testing and servicing.

  • Built-in diagnostic and demonstration plots.

  • Automatic media stacking with adjustable media bin.

  • An automatic single-axis cutter.

  • Queuing, nesting and expanded margin capabilities.

  • Easy-to-read 2 x 30 vacuum fluorescent display (VFD).

top

Recommended cables

Cable restrictions

Cable restrictions for the printer are determined by the type of interface being used. Recommendations for each interface are supplied in the following paragraphs.

RS-232-C interface

The use of short cables (each less than 15 meters or 50 feet) is recommended for the RS-232-C interface. A longer cable is permissible, provided the load capacitance does not exceed 2500 picofarads.

Centronics interface

The use of a short cable (less than 2 meters or 6.6 ft.) is recommended for the Centronics interface.

HP JetDirect interface card

HP recommends using industry standard and compliant cabling for the LocalTalk (serial and AppleTalk connections), RJ 45 (10Base-T), and BNC (10Base-2) ports. The longer the cable, the higher the quality required of that cable.

top

Interfaces and network information

The HP DesignJet 755CM printer has a bidirectional IEEE 1284 ECP - compliant parallel interface, an RS-232 serial (9-pin) interface, an HP-IB interface, and an HP JetDirect card or interface (part number J2552A) for Ethernet 10Base-T/BNC and LocalTalk preinstalled in the MIO expansion slot.

Following are network operating systems supporting the HP DesignJet 755CM printer:

Novell NetWare, Microsoft (R) LAN Manager for OS/2, Windows for Workgroups, Windows 95, Networking Windows NT, IBM LAN Server for OS/2, HP-UX, SunOS, Solaris, SCO UNIX (R), IBM AIX AT and TGIS, Tandem, MPE-ix, LANtpstJC Power Suite, and AppleTalk (EtherTalk and LocalTalk). Use in UNIX environments requires additional HP JetDirect software.

top

Media specifications

C3196A = E/A0-size printer.

Media sizes
Width (carriage axis)
Length (paper axis)
E/A0-size printer
Minimum
210 mm (8.3 inches)
Maximum
917 mm (36.1 inches)
Minimum
210 mm (8.3 inches)
Maximum
15.2 m (50 ft.)
Media types
Monochrome
Opaque bond
Translucent bond
Natural tracing paper
Vellum
Coated paper
Matte film
Clear film
Heavy coated paper
High-gloss photo paper**
Semi-gloss photo paper**
High-gloss film**
Color
Opaque bond (CAD drawings only)
Natural tracing paper*
Vellum*
Coated paper
Matte film
Clear film
Heavy coated paper
High-gloss photo paper**
Semi-gloss photo paper**
High-gloss film**
*CAD drawings only and HP media only.
**A monochrome drawing can be printed on glossy media, but all cartridges should be loaded.
NOTE: See also Supplies Source catalog and (in Europe and U.S.) Media Reference Guide. From time to time, new media types may become available. For up-to-date information, please contact an HP dealer or local HP Sales and Support Office.

Margins

Leading edge:
Trailing edge:
Sides:
Normal
17 mm (0.67 inches)
17 mm (0.67 inches)
4 mm (0.2 inches)
Smaller (roll media only)
10 mm (0.39 inches)
10 mm (0.39 inches)
5 mm (0.2 inches)
All measurements +/-2 mm (0.08 inches)

Resolution

Color/Mono set to: Mono
Fast print quality: 300 x 300 dpi
Other print qualities: 600 x 600 dpi*
PostScript: 300 x 300 dpi
Color/Mono set to: Color
All print qualities:
300 x 300 dpi but 600 x 600 dpi for black with HP RTL*
NOTE: *Except for glossy media types, on which the resolution is always 300 dpi.
Accuracy (Maximum accumulated error)
+/-0.38 mm (0.015 inch) or +/-0.2% of the specified vector length, whichever is greater, at 23 degrees C (73 degrees F), 50–60% relative humidity, on HP Matte Film.
Programming languages supported
Adobe PostScript Level 2, HP-GL (7586B), HP-GL/2, HP RTL, PJL

top

Media handling

The printers handle sheet media and roll media. Supported standard sizes are as follows:

E/A0-size printers (C3196A)
ANSI
A, B, C, D, E
ISO
A4, A3, A2, A1, A0
Metric Oversize
A2, A1, A0
Architectural
C, D, E, E1
JIS
A4, A3, A2, A1, A0, B4, B3, B2, B1, B0

The printers handle media that does not exceed the following maximum and minimum:

E-size
Min. width Sheet
8.3 inches (210 mm)
A/A4-E/A0)
Roll widths
Max. widths
24 inches (61 cm) AND 36 inches (92 cm)
36.1 inches (917 mm)
Max. Sheet length
expected to be 1.6 m
Long axis plotting available (maximum length 50 ft. (15.2m)).
The media margins define the real available plotting area on the media:

top

Ink information

Black InkJet print cartridge

51645A
Advanced pigmented ink
deep dark black ink
crisp sharp characters
fast dry time
optimized to prevent black to color bleed
Permanence
lightfastness
water resistance
highlighter type smear or blurred text
optimized to prevent black to color bleed

Color InkJet print cartridge

51644C,M,Y Color
Dye-based
More than 2X improvement in lightfastness over 51650C,M,Y.
Optimized with 51645A black ink to eliminate black to color bleed
High quality color CAD output on plain bond paper with a lower cost per page

top

Memory information

The HP DesignJet 755CM printer has 71 MB of memory. It has 4 MB of standard on-board RAM, plus 3 additional MB used internally, as well as two pre-installed 32 MB SIMMs.

top

Performance

"Normal" printer use

"Normal" printer use means less than:

  • 20 pages per day (if medium-density E/A0 CAD plots)

OR

  • 10 pages per day (if medium-density E/A0 image prints)

If drawings are smaller than E/A0, the number of pages per day could be higher.

If the printer is being used less than this, it is unlikely it will need to be serviced. If the printer is being used more than this, it is possible that, after a time, it will need to be serviced. The printer itself keeps an internal count of total pages printed and total passes of the print cartridges. If the front panel periodically displays Status: Maintenance Advised, this means that the use of the printer has exceeded one of the following:

  • 20,000 pages printed

OR

  • 4,500,000 passes of the cartridge carriage.

Contact the local HP dealer or HP service engineer to arrange a service. After the service, the message will disappear. If the message is ignored, the printer may continue to be used as normal, but may meet a number of operational or print-quality problems.

The current count of the two statistics can be seen on the Service Configuration Plot.

To print the service configuration plot

  1. Verify that media is loaded.

  2. In the Full Menu mode choose Utilities.

  3. Choose Service Config.

    NOTE: The Service Configuration Plot or " Service config " was formerly known as the " Config plot " on the HP DesignJet 650C printers.

top

Physical specifications

Weight (packed)
Length (unpacked)
Depth (unpacked)
Height (unpacked)
With stand
E/A0-size printer
61 kg (135 lb)
1370 mm (54.0 inches)
675 mm (26.6 inches)
1200 mm (47.3 inches)
Without stand
E/A0-size printer
43 kg (95 lb)

top

Electrical specifications

Source
100–240V ac +/-10%. Autoranging
Frequency
50 - 60 Hz
Power consumption
140 W max. (2.0 A max.)
Energy Star rating (USA)
Maximum power in idle state: 45 watts

top

Environmental specifications

Operational

Mechanical and electrical:
0 to 5 degrees C (32 to 131 degrees F)
@ 5 - 95% relative humidity
With cartridges and media:
15 to 35 degrees C (59 to 95 degrees F)
@ 20 - 80% relative humidity
For optimal print quality and media handling:
15 to 30 degrees C (59 to 86 degrees F)
@ 20 - 80% relative humidity

Storage

Printer and Media
–40 to 70 degrees C (–40 to 158 degrees F)
@ 20 - 80% relative humidity
Cartridges
–40 to 60 degrees C (–40 to 140 degrees F)
@ 20 - 90% relative humidity

top

Warranty

One-Year, Onsite, Next Day Hardware Warranty

Except when purchased as part of a system, Hewlett-Packard warrants the graphics peripheral hardware product against defects in materials and workmanship for a period of one year from receipt by the end user (proof of purchase required). If HP receives notice of such defects during the warranty period, HP will either, at its option, repair or replace products that prove to be defective.

Should HP be unable to repair or replace the product within a reasonable amount of time, the customer's alternative exclusive remedy shall be refund of the purchase price upon return of the product.

If this product was purchased as part of an HP system in a coordinated shipment or as a system add-on, it is warranted against defects in material and workmanship during the same period as the HP system.

top

Safety certifications

  • Information Technology

  • Equipment (ITE)

  • Movable Class I

  • Plugable Type A

  • Installation Category II

  • Pollution Degree 2

  • For indoor controlled office environments use

Canada
Canadian Standards Association "Certified" ITE, CSA C22.2 No. 950
European Union
73/23/EEC Low Voltage Directive compliant. Meets EN 60950
Mexico
DGN, NOM019-SCFI-1993 certified
Norway
NEMKO approved, EN 60950, EMKO TSE(74)DK207/94
USA
Underwriters’ Laboratories "Listed" ITE, UL 1950

top

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!