Yazdır | Bu içeriği değerlendir

HP LaserJet 1010, 1012, and 1015 Printers - Installing the Printer Software

Introduction

For easy printer setup and access to the full range of printer features, HP strongly recommends the installation of the software provided. Additionally, is it recommended to install the software before setting up the printer.

The most recent drivers, additional drivers, and other software are available from the Internet and other sources.

To view any available driver/software, CLICK HERE to go to the Software & Driver Downloads web page. Under Select a task and enter a product name/number: , click Download drivers and software (and firmware) then enter your product name or model number and click on the arrow to the right of the search box to view any available driver/software updates for your product. To view and download them, click on your operating system. Note that these updates are product and operating system specific. Also, they may not be available for all operating systems.

To order the HP LaserJet 1010/1012/1015 Printing Software CD-ROM, click on the CD-ROM order page link. Note that this CD-ROM software is not available for Windows Vista. It is available for the following operating systems:
  • Windows 2000
  • Windows XP
  • Windows NT 4.0
  • Mac OS
NOTE: Not all software is available in all languages.

System requirements for the printing software

For Windows systems

For both direct and network connection, all of the computers that use the printer must meet the following minimum requirements as listed below. IBM-compatible computer with an available USB or parallel port (HP LaserJet 1015 only) and the following:
  • Windows 95 (printer driver only, parallel connections only, HP LaserJet 1015 only): Pentium 90 MHz processor or faster and 32 MB or more of RAM
  • Windows NT 4.0 (Service Pack 3 or higher, printer driver only, parallel connections only, HP LaserJet 1015 only): Pentium 90 MHz processor or faster and 32 MB or more of RAM
  • Windows 98 : Pentium 90 MHz processor or faster and 32 MB or more of RAM
  • Windows Me : Pentium 150 MHz processor or faster and 32 MB or more of RAM
  • Windows 2000 : Pentium 133 MHz processor or faster and 64 MB or more of RAM
  • Windows XP (32-bit) : Pentium II 300 MHz processor or faster and 128 MB or more of RAM
NOTE: Windows 95 and Windows NT 4.0 do not support USB. You must use a parallel connection (HP LaserJet 1015 only) or network connection to use one of these operating systems.

For Mac OS systems

Any Macintosh computer using the hp LaserJet 1010 series software has the following minimum system requirements:
NOTE: The HP LaserJet 1010 printer model is not support in the Macintosh operating system; only the HP LaserJet 1012 and 1015 printer models are supported for Macintosh.
  • Mac OS 9.1 and higher : PowerPC processor and 96 MB of RAM.
  • Mac OS X v10.1 and v10.2 : Power Mac G3, G4, iBook, or eMac and 128 MB or more of physical RAM. A built-in display or a display connected to Apple-supplied video card is required.
  • 100 MB or more of free hard disk space
  • A USB port
NOTE: For a direct connection to a Macintosh computer, the computer must have a USB port. Parallel cable connections are not supported.
  • A CD-ROM drive (required for installation)
NOTE: Mac OS X does not support PowerBook G3 or processor upgrade cards.

top

Installing printer software

The below sections provide instructions for installing the printer software on multiple operating systems.

Installing the print driver for Windows 95

To install the printer software for Windows 95, use the Add Printer Wizard.
NOTE: Microsoft Windows 95 is supported on the HP LaserJet 1015 model only.)
  1. Click Start and then click Settings .

  2. Click Printers .

  3. Double-click Add Printer and then click Next as necessary.

  4. Click local printer and then click Next .

  5. Click Have Disk .

  6. Click Browse and then click the appropriate letter for the CD-ROM drive.

  7. Double-click the correct folder for the desired language.

  8. Double-click the Drivers folder.

  9. Double-click the Win9X_ME folder.

  10. Double-click the PCL 5e driver folder.

  11. Click the hp1015w5.inf file to highlight it

  12. Click OK to complete the driver installation. Follow the instructions on the screen.

Installing the print driver for Windows NT 4.0

To install the printer software for Windows NT 4.0, use the Add Printer Wizard.
NOTE: Microsoft Windows NT 4.0 is supported on the HP LaserJet 1015 printer model only.
  1. Click Start and then click Settings .

  2. Click Printers .

  3. Double-click Add Printer and then click Next as necessary.

  4. Click My Computer and then click Next .

  5. Click the appropriate port and then click Next .

    NOTE: For a local connection, the port is LPT1.
  6. Click Have Disk .

  7. Click Browse and then click the appropriate letter for the CD-ROM drive. If the letter for the CD-ROM drive does not appear in the drop-down list, type the correct letter followed by a colon and a forward slash. For example, type E:/ .

  8. Double-click the correct folder for the desired language.

  9. Double-click the Drivers folder.

  10. Double-click the WinNT folder.

  11. Double-click the PCL 5e driver folder.

  12. The hp1015w5.inf file should be highlighted. If not, click it to highlight it.

  13. Click Open .

  14. In the Install from Disk dialog box, click OK .

  15. Click Next .

  16. Choose the printer name (this is optional), and the default printer options. Click Next .

  17. Select whether the printer will be shared, and click Next .

  18. Click Yes , then print a test page, and then click Finish to complete the driver installation.

Installing the print driver for Macintosh

Software for Macintosh computers Accessing the print driver (Mac OS 9.x)
NOTE: The HP LaserJet 1010 printer model is not support in the Macintosh operating system; only the HP LaserJet 1012 and 1015 printer models are supported for Macintosh.
  1. From the Apple menu, select the Chooser .

  2. Click the HP LaserJet vx.x icon in the top left side of the Chooser dialog box.

  3. Do one of the following, depending on how the computer and printer are connected.

    1. USB: Go to Step 4.

    2. AppleTalk: Select the correct AppleTalk Zone for your printer in the lower left side of the Chooser dialog box

  4. Click the HP LaserJet 1010 series printer name in the right side of the Chooser dialog box.

  5. Close the Chooser .

Accessing the print driver (Mac OS X v10.x)
  1. Click the hard drive icon on the desktop.

  2. Click Applications , and then click Utilities .

  3. Click Print Center in Mac OS X v10.2 or Printer Setup Utility in v.10.3.

  4. Click Add Printer . The Add Printer List dialog box appears.

  5. Select USB or AppleTalk from the top menu.
    NOTE: If using AppleTalk, select the correct Zone from the second menu list.
  6. Select the printer name from the printer list.

  7. Click Add.

top

Installing printer software for all other operating systems

Insert the software CD that came with the printer into the computer CD-ROM drive. Follow the on-screen installation instructions.
NOTE: When the screen says looking for hardware devices , plug the USB or parallel (1015 only) cable in and be certain the printer is powered up and in a ready state.

top

Printer connections

The below sections contain information about connecting the printer.

NOTE: Install the printer software before setting up the printer.

USB connections

All HP LaserJet 1010 series printers support USB connections. The USB port is on the back of the printer.

Connecting the USB cable

Plug the USB cable into the printer and then plug the USB cable into the computer.

Figure 1: Connecting the USB cable

Parallel connections

In addition to USB, the HP LaserJet 1015 model also supports parallel connections. The parallel port is on the back of the printer. Use an IEEE 1284-compliant parallel cable.

Connecting the parallel cable

Connect the parallel cable to the printer and then connect the other end of the parallel cable to the computer.

Figure 2: Connecting the parallel cable

top

Geribildirim verin

Lütfen bu sayfadaki bilgileri değerlendirerek içeriğimizi geliştirmemize yardımcı olun. Teşekkür ederiz!