Print | Rate this content

Blinking Lights on the HP Deskjet 5440 Printer Series

Blinking lights

The lights on the front of the HP product can be on, off, or blinking (flashing), depending on the status of the product. The lights indicate product status and are useful for diagnosing printing problems.

Figure 1: Lights and buttons on the product control panel

Graphic: Lights and buttons on the product control panel
1 - Power light
2 - Print Cancel button
3 - Resume light
4 - PictBridge lights

Figure 2: PictBridge lights (Lower left side on front panel)

Graphic: PictBridge lights
1 - PictBridge Connection light
2 - PictBridge Error light

The following sections describe the most common combinations of blinking lights, followed by solutions for each combination. Find the blinking lights pattern you are experiencing, and then follow the steps to resolve the issue.

Service the printer

Contacting HP for service in Asia Pacific.

If you have completed all the preceding steps and are still experiencing a problem, you may need further assistance from HP to remedy your concern.

Please contact HP using one of the options found at Contact HP to obtain service.

Contacting HP for service in all countries/regions except Asia Pacific.

If you have completed all the preceding steps and are still experiencing a problem, service the product.

Determine if your product is in warranty or out of warranty. If you need help determining your product’s warranty status, go to HP’s Warranty Check Tool .

  • If your product is in warranty, Contact HP to obtain service.

  • If your product is out of warranty, Contact HP to find an authorized service provider or to setup service (fees might apply).

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!