Print | Rate this content

HP Officejet J6400 and 6500 All-in-One Printer Series - Copying to a Paper Size that Differs from the Original

Introduction

The product is capable of enlarging or reducing an original to fit a different size of paper. Use this feature to reduce an original to prevent unwanted cropping, or to reduce or enlarge an original.

This document describes how to copy an original to fit on the size of paper loaded in the product.

Copying to a paper size that differs from the original

Follow these steps to copy an original onto a different paper size.

  1. Make sure you have loaded the correct size of paper in the input tray.

  2. Load your original print side down on the scanner glass or your full size original print side up in the Automatic Document Feeder (ADF).

    NOTE: Do not load photos in the ADF; this might cause damage to your photos.
  3. Press the COPY Menu button repeatedly till Reduce/Enlarge displays.

  4. Choose one of the following options.

    • If you loaded your Letter or A4 size original in the document feeder tray or on the glass and are copying to Letter or A4 size, press the right arrow button () until Full Page 91% displays.

    • If you have loaded a full or small-size original on the glass, press the right arrow button () until Fit to Page displays.

    NOTE: The Fit to Page copy feature will not work for originals loaded in the ADF.
  5. Press START COPY Black or START COPY Color.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!