|| Rate this content|
HP EliteBook 6930p Notebook PC - Removing and Replacing the Wireless WAN Minicard
This document is provided to assist in removing and replacing the Wireless WAN Minicard for the HP EliteBook 6930p Notebook PC.
Minimum skill level
The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.
Small, Phillips-head P0 screwdriver.
NOTE: Part numbers are subject to change.
The replacement part number will vary depending on the Wireless WAN Minicard that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP .
NOTE: For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.
Summary of instructions
To view a video demonstrating the procedure for removing the Wireless WAN Minicard, click on the link below. Or use the product video listing on the HP Services Media Library then select Wireless WAN Minicard from the menu on the upper left hand side of the screen.
Click here to view the Wireless WAN Minicard removal video (right-click on the link to open in a new window/tab).
Wireless WAN Minicard removal
Wireless WAN Minicard replacement
NOTE: Before installing the new wireless WAN Minicard, record the MEID and IMEI numbers located on the new Minicard’s label. If the service provider is a CDMA (EVDO) operator, the MEID number is required to reactivate the customer’s wireless service after the new Minicard is installed or to establish a new account. If the service provider is a GSM (HSDPA) operator, the SIM card ICCID (customer account number) is the only number required to reactivate the customer’s wireless service after the new Minicard is installed. If the service provider is a GSM (HSDPA) operator, the SIM card ICCID (customer account number) and the IMEI number is required to establish a new account.
If your part requires return then click on the appropriate link below: