Print | Rate this content

HP ProLiant Servers - HP iSCSI Boot for Microsoft Windows User Guide: Syntax Error in Procedure to Add HP Drivers to the Microsoft Windows 2008 DVD WIM Image

Issue

The HP iSCSI Boot for Microsoft Windows User Guide (Part Number 519430-001 , March 2009 (First Edition)) lists a procedure to add HP drivers to Microsoft Windows 2008 DVD WIM image on pages 14 and 15, step 11. This results in an error message such as:

PEIMG failed to complete the operation with status code 0x8007003

When the syntax is applied as printed (that is, by copy and paste operation).

Solution

Use the following syntax to successfully add the HP drivers to the Microsoft Windows 2008 DVD WIM image:


peimg /inf=.\HPNicUpdate\drivers\bxnd.inf /image=.\HPNicUpdate\MountPoint\Windows peimg /inf=.\HPNicUpdate\drivers\bxvbd.inf /image=.\HPNicUpdate\MountPoint\Windows peimg /inf=.\HPNicUpdate\drivers\bxois.inf /image=.\HPNicUpdate\MountPoint\Windows

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!