Print | Rate this content

HP LaserJet M2727nf, CM1312nf, CM1312nfi, CM2320n, CM2320nf and CM2320fxi MFP Series Printers - Changing an ADF Assembly

Information

If the ADF assembly is not functioning, it may need to be replaced. Complete the following steps to replace the ADF assembly:

Details

  1. Open the scanner cover (it contains the ADF assembly).

  2. Squeeze the locking tabs on the ADF wire-harness plug (callout 1), and then disconnect the plug from the flatbed.

  3. Lift the scanner cover (containing the ADF assembly) straight up and off of the flatbed.

  4. Close the cover.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!