Print | Rate this content

HP Scanjet G2410/2400 Scanners - Installing HP Solution Center 13.0 in Windows 7


Instructions to install the HP solution center 13.0 on Windows 7.


  1. Download the HP scanjet G2410 or HP scanjet 2400 full featured software from the below link:

    Click here to download the software utility/driver at .

  2. 2. Double click on the file setup_full_2400_series_3.exe and start installing the software as shown below:

  3. Click on Next as shown below to start the installation.

  4. Accept the License Agreement as shown below and click on Next to proceed further.

  5. The software starts installing as shown below:

  6. Connect the USB cable of the scanner to the PC when it is prompted as shown below and Click on OK .

  7. Click on Finish as shown below when you are done with the installation.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!