Print | Rate this content

HP Color LaserJet CM3530 MFP Product Series - Firmware Readme

This document contains information for the firmware revision number 20100306 53.051.4 and any previous revisions if applicable.

Product Name(s):

  • HP Color LaserJet CM3530 MFP

  • HP Color LaserJet CM3530fs MFP

Model Number(s):

  • CC519A

  • CC520A

Enhancements and Fixes provided with Firmware revision 53.051.4

Enhancements

The following new functionality or features are provided by this firmware release: (Datecode: 20100306 53.051.4)

Base Product

  • HP has implemented a new method of page counting (known as Print Usage Tracker), which can be enabled if desired. The administrator or owner of the product has the option either to enable the new counting method or to do nothing. If the new counting method is enabled the device cannot return to the previous counting method . It is important to understand this. If the feature is not enabled, nothing will change on the device and it will continue to count pages the same as it originally did from the factory.

Background:

Current page counting methods were designed to enable efficient service and support. The Print Usage Tracker feature implements new page counting methods which are more aligned with today’s job accounting needs.

Additional information:

For more information about the Print Usage Tracker feature, visit, www.hp.com/go/support . Navigate to the SUPPORT AND DRIVERS page web page for your product, or search by name or model of your device (for example, HP Color LaserJet CM3530 MFP or model number CC520A). Once you have located your support page search for “Print Usage Tracker”. Additional information may also be obtained by contacting your regions HP Customer Support Center. This information can be located in the “User” manual that came with your product documentation or on the CD-ROM.

How to enable the feature:

If desired, use the following steps to enable the new page counting method (known as Print Usage Tracker) via the product’s Embedded Web Server.

  1. Update your device firmware to this release or greater.

  2. Once this is done the Print Usage Tracker acceptance and activation screen will be available from the product’s Embedded Web Server (EWS) at the following location: EWS , Settings , Security , Device Security Settings , Print Usage Tracker .

  3. Review the acceptance screen so that the changes are understood and you are comfortable with how the changes may or may not affect your HP device or product use model.

  4. If you are comfortable with the acceptance statements and the new counting functionality, choose to enable the feature. As stated previously it is very important to understand that once enabled the device cannot return to the previous counting method.

    1. Select I Accept .

    2. Select Enable the Print Usage Tracker feature on this device .

    3. Press Apply .

NOTE: Currently this functionality can only be enabled through the product’s Embedded Web Server (EWS). In the future, HP will provide the ability to enable this functionality through HP’s Device management software called HP Web Jetadmin. The Web Jetadmin support pages can be accessed using the following URL: www.hp.com/go/webjetadmin .

Additional enhancements to base product

  • A new feature has been added which will allow the administrator to configure the device to auto recover from intermittent 49.XXXX errors. With this release the feature will be enabled ON by default. For Single function devices you will find the selection under the following menu: CONFIGURE DEVICE , SYSTEM SETUP , Auto Recovery. For “M” Series Multifunction Devices you will find the selection under the following menu: ADMINISTRATION , MANAGEMENT , Auto Recovery .

Analog Fax

N/A

Digital Sending

  • Support added for Embedded Send to Network Folder Quick Sets.

  • Support added for a single Embedded Send to Network Folder alias to send to multiple network folder destinations.

  • Support added for the ability to configure up to ten Embedded Send to Network Folder address books.

  • Support added for import/export of Embedded Send to Network Folder address books.

Embedded Jet Direct

  • N/A

Fixes or improvements

The following fixes or improvements are provided by this firmware release: (Datecode: 20100306 53.051.4)

Base Product

  • An intermittent 49.144b, 30.01.41 error may be seen on the HP Easy Select Control Panel.

  • Possible 49 error when using PCL5 macros (more likely with USB mass storage device connected).

  • Very slow printing or printer hangs may occur when a very complex Postscript file with large amounts of lineto commands are present.

  • 49.4c04 Error may be seen when printing certain files from Illustrator CS3 and/or when printing PDF files.

  • A 49.4c06 may be displayed on the control panel when printing certain files from Excel that contain non-printable characters.

  • Turning the printer OFF then ON too quickly may cause the printer not to boot up properly.

  • Very dark dense black copies may print as composite black when using the Autodetect copy setting.

Analog Fax

  • Possible 49.5001 errors when using Fax and/or email address books.

Digital Sending

  • Possible 49.5001 errors when using Fax and/or email address books.

  • Scan Setup Wizard does not work correctly with 2-byte languages.

  • Authentication could fail if the user password contained the Euro character.

  • A 49.4C02 error could occur when applying Kerberos configuration settings through HP MFP Digital Sending Software.

  • Users are unable to specify scan filenames when the MFP is configured for Send to Network Folder through HP MFP Digital Sending Software and configured for Novell Authentication.

Embedded Jet Direct

  • Incompatibility with Win Server 2008 and 802.1x

  • CA certificate not accessible via SNMP

  • IPP printer-URI-string miss-formatted

  • DHCPINFORM transmit rate too high

  • Possible network hang during DHCPv6 configuration when a configuration is received from a DHCPv6 server.

  • User incorrectly allowed to install an Identity certificate instead of a CA certificate.

COMPONENT
FIRMWARE VERSION
HP LJ CM35530 mfp
53.051.4
(Datecode: 20100306 53.051.4)
Embedded JetDirect:
V.38.80.FF
Copy Processor Board (CPB):
6.037 (0.0)
Scanner Control Board (SCB):
CHE002 4.0 (No Change)
Analog Fax
8.6A (No Change)
DC Controller:
02.066 (25) (No Change)
Formatter Boot Loader
LDR 02.08

top

Improvements provided with previous firmware revisions

NOTE: All improvements with previous revisions of firmware are included within the most current revision.

Enhancements and Fixes provided with Firmware revision 53.040.7

Enhancements

The following new functionality or features are provided by this firmware release: (Datecode: 20091123 53.040.7)

Base Product

N/A

Analog Fax

N/A

Digital Sending

N/A

Embedded Jet Direct

N/A

Fixes or improvements

The following fixes or improvements are provided by this firmware release: (Datecode: 20091123 53.040.7)

Base Product

  • You may be able to do a copy job without authenticating.

  • Information may be missing from the EWS when connected via IPv6.

Analog Fax

  • When Auto Setting Reset is configured to Immediately Reset Device , a copy job may be performed instead of a faxing or digital sending job.

  • Possible 49.4C06 error when sending a fax.

Digital Sending

  • The sent PDF document size may exceed the standard A4 size when scanning A4 documents.

Embedded Jet Direct

N/A

COMPONENT
FIRMWARE VERSION
HP LJ CM35530 mfp
53.040.7
(Datecode: 20091123 53.040.7)
Embedded JetDirect:
V.38.68.FF (No Change)
Copy Processor Board (CPB):
6.035 (0.0) (No Change)
Scanner Control Board (SCB):
CHE002 4.0 (No Change)
Analog Fax
8.6A (No Change)
DC Controller:
02.066 (25) (No Change)
Formatter Boot Loader
LDR 02.08

top

Enhancements and Fixes provided with Firmware revision 53.031.4

Enhancements

The following new functionality or features are provided by this firmware release: (Datecode: 20090914 53.031.4)

Base Product

  • The ability to allow the device to auto-reboot after a system error has been implemented. This feature will be disabled by default. The feature can be enabled by accessing the following menu: ADMINISTRATION , MANAGEMENT , Auto Recovery .

  • Additional information will be provided in the Event Log for Paper Jam conditions. In addition, the Event log can now display up to 90 events depending on the event type. The additional information presented for a paper jam error is not applicable / useable by an end-user or support person.

  • The Asset Field found in the products EWS (Embedded Web Server) which is used for assigning Asset numbers to a device has been changed to allow support for more characters.

  • Support for 3” x 5” paper has been added through Tray 1 only. The Custom paper size for Tray 1 needs to be set to the proper dimensions through the Supplies Status Menu. The UPD 5.0 driver(s) must be used. Tray 1 paper guides will require special snap in guides which can be purchased from HP. Contact your regions HP support center for additional information.

  • The Wake-Up schedule can now be set with Sleep Mode disabled.

Analog Fax

N/A

Digital Sending

N/A

Embedded Jet Direct

N/A

Fixes or improvements

The following fixes or improvements are provided by this firmware release: (Datecode: 20090914 53.031.4)

Base Product

  • A 49.4C02 may be seen on the control panel when printing large PostScript Files.

  • Some PostScript files generated from SAP applications may print barcodes incorrectly.

  • User-defined media types do not display correctly in non-English languages.

  • When the PostScript font pages are printed with the control panel language set to Russian certain characters will overlap on page borders.

  • Manual Feed jobs will not work correctly when using PLC5e.

  • Certain characters displayed on the printed Supplies Status page will display incorrectly when the control panel language is set to Russian or Greek.

  • A 49.144B error may be seen on the HP Easy Select Control panel. Updating to this firmware may lessen the occurrence of this error.

  • Job Storage - When printing All Personal Jobs with a pin, the quantity set within the driver get defaulted to one copy for each job.

  • Color Usage Job Log is still visible after turning off the feature off with in the Embedded Web Server.

  • User-defined media types do not display correctly in non-English languages.

  • Special characters are not accepted in a device password.

Analog Fax

  • A full fax activity log may result in Modem Fail (82) or Modem Fail (84) messages.

  • Possible Job Fail (0), compression errors or fax corruption with fax firmware versions 2.36v and 2.37m.

  • Stored Fax does not print after performing Restore Factory Settings.

  • In rare cases, a No Fax Detected message may occur when a fax machine is at the other end.

  • When sending a fax, a No Dial Tone occurrence does not result in an automatic retry.

  • A Remote Abort message is added to notify users the remote fax disconnected.

  • Results column may be truncated in Fax Activity log when set to Verbose.

  • Fax Header page numbers may be cut off in superfine mode.

  • With ECM off, only one page faxes are resent. Multiple page faxes fail to resend.

  • Sending to a Fax Distribution List may result in corruption if one receiver doesn't support the scanned resolution.

  • Faxing A3 paper size to A4 paper size may result in a blank page or cropped image.

  • A Large Fax address book is slow to search, and may cause 49.4C02 errors.

  • A 49.4C02 error may occur when cancelling a fax job while the control panel shows Connected to...

  • Maximum Characters Reached message is not displayed after 31 characters entered when keyboard language is set to Japanese.

  • The fax email notification thumbnail may have the file extension .01 instead of .tif.

Digital Sending

  • LDAP authentication (Simple or Simple over SSL) could fail with an insufficient privileges error in some configurations.

  • A 49.4C02 error may be seen when Disable Reverse DNS Lookups is selected under Settings , Kerberos Authentication , Advanced .

  • There is now the option to specify a primary and backup LDAP server under Settings , Kerberos authentication . This feature reduces authentication failures related to hostname resolution issues during the LDAP portion of the authentication cycle.

  • Certain number combinations entered at the control panel as part of a digital send job would lock up the control panel.

  • Embedded send to network folder digital send jobs would fail when NTLMv2 is selected as the password encryption method.

  • The digital send log would incorrectly designate some failed digital send jobs as successful.

  • A 49.00FF error could be generated after an abnormal communication break between the MFP and its configured DSS server.

  • Kerberos Authentication could fail with a LDAP Local Bind Error error message.

  • Embedded send to network folder digital send jobs may fail to create XML metadata files.

  • An unspecified DNS server is used by the MFP to resolve hostnames for some embedded send to network folder digital send jobs.

  • Embedded send to network folder digital send jobs may generate metadata files with truncated output.

Embedded Jet Direct

  • Installation of a Root CA Certificate no longer causes Invalid Format on other certificate installations.

  • Access Control List contents now persist over reboots.

  • HTTPS is forced on Printer/MFP tabs when required.

  • When DNS responses are returned as a stream (TCP) rather than a datagram (UDP), JDI would wait forever for more data.

  • When Web JetAdmin is on a different subnet than the printer and establishes an HTTPS connection to query status, the JDI would mishandle the connection and hang.

  • Allow IPP operation when EWS disabled.

  • Allow Web JetAdmin Admin operations when the Embedded Web Server is disabled.

COMPONENT
FIRMWARE VERSION
HP LJ CM35530 mfp
53.031.4
(Datecode: 20090914 53.031.4)
Embedded JetDirect:
V.38.68.FF
Copy Processor Board (CPB):
6.035 (0.0)
Scanner Control Board (SCB):
CHE002 4.0 (No Change)
Analog Fax
8.6A (No Change)
DC Controller:
02.066 (25)
Formatter Boot Loader
LDR 02.08

top

Enhancements and Fixes provided with Firmware revision 53.021.2

Enhancements

The following new functionality or features are provided by this firmware release: (Datecode: 20090603 53.021.2)

Base Product

  • Paper Jams now include additional status bytes in the Event Log.

  • Smartcard Solution for U.S. Government (previously MFP Smartcard Authentication Solution): Ability to Encrypt E-mail with senders PKI certificate, CDP (Certificate Revocation List Distribution Point) Certificate Validation, and support for FBI Proprietary Common Access Card Format.

Analog Fax

N/A

Digital Sending

N/A

Embedded Jet Direct

N/A

Fixes or improvements

The following fixes or improvements are provided by this firmware release: (Datecode: 20090603 53.021.2)

Base Product

  • The Maximum Control Panel lock will not lock access to the Stop button.

  • The device will interpret letter size originals as Legal from the flatbed when Mixed Letter/Legal is set for ADF.

  • The device will not boot when a hard drive is not installed.

  • When selecting to print all stored jobs from the front control panel you may see a longer than expected delay between stored jobs. With this new behavior, you will no longer see a delay between files as long as the job attributes are the same.

  • When printing a personal job without a PIN number the job will print –1 based on the number of copies selected in the print driver for the job. For example: If 10 copies were selected in the driver, only 9 copies will print.

  • Vivid Color table support corrected.

  • Alternative Letterhead mode will not function correctly when a tray selection is made using a tray selection command instead of a paper type selection command.

  • Issues may be seen using the Alternative Letterhead feature.

  • A new message is being added to indicate when the ADF cable is not connected to the SCB. The error message posted to the Event Log is 30.01.47.

  • An ADF jam may be seen where the paper is only partially delivered to the output bin.

  • Copy image placement may be skewed.

  • When a formatter board is replaced for service reasons when using an HP Secure High Performance hard drive the device will come to a READY state but it will also display a message indicating that the hard drive is not functioning and the feature icons that require a hard drive will indicate that the feature is not available.

Analog Fax

  • Possible corrupted fax pages when using one level of forwarding.

  • Disable V.34 Menu Item is removed because V.34 is automatically enabled or disabled.

  • Maximum Baud Rate can now be selected separately for send and receive.

Digital Sending

  • Embedded Send to email jobs would initiate the SMTP session with the EHLO command instead of the HELO command.

  • A potential for the Kerberos configuration on the MFP to become corrupt could generate a 49.4C02 error on the MFP.

  • When Default Job Options , Default Copy Options , Color - Black/White is configured to AUTODETECT , JPEG file color output would be inconsistent with the configured color output setting for digital send jobs.

  • When Disable Reverse DNS Lookups is enabled under Settings , Kerberos Authentication , Advanced , the MFP could experience a 49.4C02 error.

  • Some Embedded Send to Network Folder jobs would result in corrupt PDF output in the destination directory.

Embedded Jet Direct

  • LPD queue may not clear correctly.

  • Jet Direct now properly specifies its cryptographic binding in the 802.1x protocol.

COMPONENT
FIRMWARE VERSION
HP LJ CM35530 mfp
53.021.2
(Datecode: 20090603 53.021.2)
Embedded JetDirect:
V.38.68.FF
Copy Processor Board (CPB):
6.034 (0.0)
Scanner Control Board (SCB):
CHE002 4.0
Analog Fax
8.6A (No Change)
DC Controller:
02.061 (20) (No Change)
Formatter Boot Loader
LDR 02.07

top

Enhancements and Fixes provided with Firmware revision 53.011.2

Enhancements

The following new functionality or features are provided by this firmware release: (Datecode: 20081210 53.011.2)

Base Product

  • Add device localization (device display, device input, EWS input, EWS display, internal pages) for the Catalan Language.

  • The ability to control the order in which stored Print and Copy Jobs are retrieved has been added to the device. In addition, the ability to retrieve all jobs stored with a PIN and or without a PIN has been added back to the user interface. To control the order in which the jobs are retrieved access the following menu found under the ADMINISTRATION ICON: ADMINISTRATION , MANAGEMENT , STORED JOB MANAGEMENT , Stored Job List Order .

  • Language support has been added for the following languages: Romanian, Croatian, Slovenian, Slovak and Greek.

Analog Fax

  • The user can now choose an alternative keyboard layout when using the keyboard. The icon that allows this selection can be enabled from the following HP Easy Select Control Panel Menu: Administration , Device Behavior , Keyboard Layout Button .

  • With the release of this firmware roll HP has added IME (input Method Editor) functionality for the following languages: Japanese, Traditional Chinese, Simplified Chinese and Korean.

    Functionality added includes:

    • Use of the input keyboard on the control panel

    • Language specific input keyboard or 10-key keypad support using an overlay

    • Enter and converting of text

    • Use of the Address Book

    • Adding entries in the Address Book

    • Searching for Japanese entries in the fax Address Book

    • Auto-complete of an e-mail address

    Visit www.hp.com for the Asian Addendum Manual to learn more about this feature or contact you local in country Hewlett Packard support provider.

  • Number of pages added to fax notification (printed and/or email)

Digital Sending

  • Send to FTP can now be configured to add a timestamp to the destination file name.

  • Users can now set the name of the Send to Email attachment.

  • Send to FTP can now be configured to disable the access verification (send FTP test file) of the destination directory for every job.

  • Timeout for send to FTP jobs increased to better handle network latency.

  • Embedded Send to Network Folder can now be configured to send to a user's home directory.

  • Embedded Send to Network Folder has added support for Distributed File System (DFS) folder destinations.

  • Kerberos Authentication can now be configured to support multiple domains.

  • Address Book Search is now available in Japanese.

  • The user can now choose an alternative keyboard layout when using the keyboard. The icon that allows this selection can be enabled from the following HP Easy Select Control Panel Menu: Administration , Device Behavior , Keyboard Layout Button .

  • With the release of this firmware roll HP has added IME (input Method Editor) functionality for the following languages: Japanese, Traditional Chinese, Simplified Chinese and Korean.

    Functionality added includes:

    • Use of the input keyboard on the control panel

    • Language specific input keyboard or 10-key keypad support using an overlay

    • Enter and converting of text

    • Use of the Address Book

    • Adding entries in the Address Book

    • Searching for Japanese entries in the fax Address Book

    • Auto-complete of an e-mail address

    Visit www.hp.com for the Asian Addendum Manual to learn more about this feature or contact you local in country Hewlett Packard support provider.

  • A wizard is now available from the control panel to assist in the configuration of send to email. This can be accessed from the following control panel menu: Administration , Initial Setup , Email Setup , Email Wizard .

  • When the device is managed by DSS 4.11 (or higher), it is now possible to have jobs sent to email and folder OCR processed.

Embedded Jet Direct

  • N/A

Fixes or improvements

The following fixes or improvements are provided by this firmware release: (Datecode: 20081210 53.011.2)

Base Product

  • The Configuration page and other internal pages of the device are not localized in Greek.

  • The Configuration page and other internal pages of the device are not localized in Russian.

  • When the HP Easy Select Control Panel's Language is set to Russian the Date and time stamp is displayed incorrectly.

  • Resend RFU Via USB Dev Port message may appear on the Front Control panel. This firmware will keep this error from appearing after the device has been updated with this version. It will not address the error if it is seen on the HP Easy Select Control panel.

  • Excessive ADF (Automatic Document Feeder) jams may be seen. This release provides an improvement in overall jam rate; new recovery sequences for document feeder pick errors.

  • A timing issue results in the scanner to repeatedly trying to seek the home position. This results in a rattling or squeaking noise when coming out of power save.

  • In rare cases, a PCL6 file may cause a 49.4C02 or 49.4C06 error.

  • Very slow performance when printing certain file.

  • When the HP Easy Select Control panel is set to the Greek language, you will see incorrect characters for Edge to Edge found under the Copy Icon.

  • The Date and Time is displayed incorrectly on the HP Easy Select Control panel when the languages is set to Korean.

  • Can not print multiple copies of stored jobs when selecting All Files .

  • A 49.4C01 error may occur after a firmware upgrade is performed on a device that is used primarily for faxing and/or has been in service for a long period of time.

  • The HP Easy Select control panel may become unresponsive if the device is busy with other activities such as printing, digital sending or faxing.

  • When a tray size is set to Letter-R, A4-R or Custom and the tray is empty the mfp will not go to sleep.

  • The “M” Series MFP’s control panel may hang after a user has printed to the device when the control panel language is set to anything other than English.

  • Toner status alert may contain erroneous characters in Japanese localization.

  • Incorrect Japanese localization on Stored Jobs screen.

  • The explanations provided for Slovak on-line control panel information was extremely abbreviated.

  • When using the Globe icon to change languages, response may be slow in Asian languages. After the initial selection of a language, it is now cached.

  • The Embedded Web Server (EWS) may hang if the domain values are not set first in WJA.

  • Some Korean characters combinations appear as if they are being combined with other characters on the HP Easy Select Control panel.

  • The default keyboard for user and password authentication login is full-width when set to Japanese.

  • A Prompt is missing that tells the user to hold the hard keys to select a candidate. This is seen when using Chinese IME for selecting a candidate when using the hard key button associated to the candidate.

  • The list presented for the selectable keyboard defaults to the beginning of the list instead the selected layout.

  • Japanese characters may show up as garbled text when placed in the file path string for the Print feature found under the Print menu / Information tab of the Embedded Web Server.

  • Stroke has been removed from the sequence of input methods for Traditional Chinese using the soft touch keyboard.

  • Conversion list includes candidates of unexpected prediction when Simplified Chinese IME is the default.

  • Conversion list includes candidates of unexpected prediction when Traditional Chinese IME is the default.

  • Korean input keyboard doesn't show all the characters when the SHIFT key is On .

  • Japanese IME doesn't move cursor to the first part of the string if the rest of the string includes only katakana characters.

  • Korean input method doesn't construct a word with mixture of consonants and vowels. It doesn't manage the final consonant, called patch'im, for example.

  • Back slash/ Arrow Key is missing in keyboard layout for Czech, Danish and Finnish.

  • The Warming Up message presented on the HP Easy Select Control panel is improperly localized in Russian.

  • If the Create Stored Copy Job feature is removed in the EWS, Stored Print jobs cannot be deleted or retrieved.

  • SMTP server can't be configured by hostname from WJA.

  • Use Defaults button in EWS Custom DST settings does not work.

  • EWS Localization in Autosend is not Consistent for the Word “Test” in Portuguese.

  • Trays configured for A5 or Custom paper may change to Letter-R or A4-R after a power cycle.

  • User options are not loaded properly when logging in as any user and then returning to the home menu and pressing the E-mail button.

  • You may see a 49.4CF0 when printing certain types of PDF files.

Analog Fax

  • Some stored fax jobs may not be printable.

  • The control panel may improperly display an error message during fax jobs.

  • The control panel may display Connecting... for an extended period of time when sending or receiving a fax job.

  • NoAnswer or ModemFail(0) can be caused by incoming ring just before dialing another fax number.

  • Fax Time Stamp does not show the final retry time. It only showed the first try time.

  • It may take 45-90 minutes to receive a one page fax, and may result with an error.

  • The last digit of the incoming fax number Is missing on the fax activity log when the received fax is from a non-hp fax device.

  • A 49.4C01 error may occur after a firmware upgrade is performed on a device that is used primarily for faxing and/or has been in service for a long period of time.

  • Occasional ModemFail , CommunicationError and PageFail error codes in the error report.

  • The HP Easy Select control panel may become unresponsive if the device is busy with other activities such as printing, digital sending or faxing.

  • Firmware upgrade may fail to upgrade to the correct modem (fax) FW version.

  • Faxing while the device is printing often causes modem error or error during printing.

  • Some Japanese Full-width texts on the Fax Header are covered by black in the bottom half area.

  • The default keyboard for user and password authentication login is full-width when set to Japanese.

  • A Prompt is missing that tells the user to hold the hard keys to select a candidate. This is seen when using Chinese IME for selecting a candidate when using the hard key button associated to the candidate.

  • A Japanese full-width SPACE character in fax header for the company name shows an erroneous character on a received fax.

  • Japanese search is not available for searching Fax Speed Dial.

  • The list presented for the selectable keyboard defaults to the beginning of the list instead the selected layout.

  • Japanese characters may show up as garbled text when placed in the file path string for the Print feature found under the Print menu / Information tab of the Embedded Web Server.

  • Stroke has been removed from the sequence of input methods for Traditional Chinese using the soft touch keyboard.

  • Conversion list includes candidates of unexpected prediction when Simplified Chinese IME is the default.

  • Conversion list includes candidates of unexpected prediction when Traditional Chinese IME is the default.

  • Korean input keyboard doesn't show all the characters when the SHIFT key is On .

  • Japanese IME doesn't move cursor to the first part of the string if the rest of the string includes only katakana characters.

  • Korean input method doesn't construct a word with mixture of consonants and vowels. It doesn't manage the final consonant, called patch'im, for example.

  • The characters + - ( ) [ ] * are not available in the Fax address book fax number field.

  • Speed Dial number missing from printed Speed Dial list.

  • Fax printing schedule does not handle 12:00 AM/PM correctly.

  • Fax does not fall back to v.17 correctly, resulting in increased fax failures.

  • A No Answer may occur because Retry is too soon after a failure.

  • Thumbnail missing on call report for first PC Fax sent.

  • Fax report headers may overlap.

  • Crashes or slow response time when printing the fax activity log. Occasionally other strange fax issues occur because too many T30 traces are stored on the disk.

  • Fax Call Report may fail to print when Thumbnail option is set to Yes .

  • Speed Dial list may not populate the Name and Number fields.

  • Internal Fax firmware revision may be missing or incorrect on EWS configuration page.

  • The wrong keyboard constraint is set to the Fax number field in Administration-Initial Setup-Fax Setup with Japanese keyboard for both Romaji and Hiragana keyboards.

    The input mode key label shows Alpha-Numeric Input mode with a disabled status, but the actual input mode is Hiragana with Full-width. A user cannot enter a fax number at the keyboard. When user touches a key it then clears the existing characters in the field and will no allow characters input.

Digital Sending

  • Control Panel User Interface slides off of the screen when MFP is configured with Novell Authentication.

  • Deleting and reconfiguring a Kerberos default realm may require a disk initialization when only one realm is configured on the MFP.

  • Kerberos authentication can now be properly configured using the latest version of WebJetAdmin 10.X

  • Under rare circumstances, a user may not be able to initiate a send to FTP job if one is already in progress.

  • The HP Easy Select control panel may become unresponsive if the device is busy with other activities such as printing, digital sending or faxing.

  • Some Korean characters combinations appear as if they are being combined with other characters on the HP Easy Select Control panel.

  • The default keyboard for user and password authentication login is full-width when set to Japanese.

  • The Digital Sending log file saved in the Log menu of the EWS Digital Sending page may contain erroneous characters when set to Japanese localization.

  • A Prompt is missing that tells the user to hold the hard keys to select a candidate. This is seen when using Chinese IME for selecting a candidate when using the hard key button associated to the candidate.

  • Multiple page ESNF jobs fail when the HP Easy Select Control panel language is set to Korean or Simplified Chinese.

  • The list presented for the selectable keyboard defaults to the beginning of the list instead the selected layout.

  • Japanese characters may show up as garbled text when placed in the file path string for the Print feature found under the Print menu / Information tab of the Embedded Web Server.

  • The help page for the Save To Folder menu of EWS Digital Sending page displays garbled when user opens with a localized Japanese version of an internet browser.

  • Stroke has been removed from the sequence of input methods for Traditional Chinese using the soft touch keyboard.

  • Conversion list includes candidates of unexpected prediction when Simplified Chinese IME is the default.

  • Conversion list includes candidates of unexpected prediction when Traditional Chinese IME is the default.

  • Korean input keyboard doesn't show all the characters when the SHIFT key is On .

  • Japanese IME doesn't move cursor to the first part of the string if the rest of the string includes only katakana characters.

  • Korean input method doesn't construct a word with mixture of consonants and vowels. It doesn't manage the final consonant, called patch'im, for example.

  • Forward slash/ Arrow Key is missing in keyboard layout for Czech, Danish and Finnish.

  • PCL files generated for LANFax (with DSS) may be corrupted.

  • PCL files generated for LANFax (with DSS) are always compressed.

  • Disk initialization does not properly clear authentication assignments.

  • Kerberos authentication fails when public credentials are used and Simple is configured as the LDAP server bind method.

  • Character limit for custom email message subject has been increased for Embedded Send to Email.

  • Specifying a filename disables the create directory based on username feature in embedded send to network folder.

  • Initial setup of send to home directory causes erroneous Access Denied notification in HP Digital Send Software.

  • MFPs could generate truncated Send to FTP output.

  • MFPs could pass credentials multiple times when performing send to network folder.

  • Embedded Send to Network Folder could fail with a 49 error when sending a PDF file to a folder with a long folder name.

  • When configured to send to home folder in HP Digital Sending Software, the folder destination would not retain after changing the filename.

  • Specifying a filename disables the Create Directory Based On Username feature in Embedded Send to Network Folder.

Embedded Jet Direct

  • A 49.FF03 error may occur when performing a digital send job using Kerberos authentication.

  • Possible 49.FF03 errors when sending to a network folder.

  • MFP becomes non-responsive after and HP SIM discovery.

  • A 49 error may be seen when DHCP NAK does not include the server ID.

  • JDI DHCP releases the IP address during an RFU, causing some security software to react.

COMPONENT
FIRMWARE VERSION
HP LJ CM35530 mfp
53.011.2
(Datecode: 20081210 53.011.2)
Embedded JetDirect:
V.38.67.FF
Copy Processor Board (CPB):
6.033 (0.0)
Scanner Control Board (SCB):
CHE002 3.7
Analog Fax
8.6A
DC Controller:
02.061 (20)
Formatter Boot Loader
LDR 02.05

top

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!