Print | Rate this content

HP Baseline Switch - How to setup an IP Address using CLI

3Com Knowledgebase Article

Title:

HP Baseline Switch - How to setup an IP address using CLI

Description:

Use a CLI cable between PC and switch

Open Hyper Terminal and use the following parameters

Bits per second 38400 Data bits 8 Parity None Stop bits 1 Flow control None

Click Apply > Enter

Login: admin

Password: click ENTER

Once you are logged into the console use the following commands:

Select menu option# ipsetup 169.254.158.100 / 255.255.255.0 (IP and mask used here are an example)

Select menu option# summary (will show the IP and mask previously configured)

Goal:

Setup IP address using CLI for 3CBLSG24

Product:

3CBLSG24 - FRU Baseline Smart Gig SFP 24

Version 1.00.07

Fact:

FRU Baseline Smart Gig SFP 24

set up ip address via CLI

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!