|| Rate this content|
HP Notebook PCs - Troubleshooting Problems with Docking Stations
This document pertains to HP and Compaq Notebook PCs with a docking station.
This document contains recommendations for resolving issues that you may encounter while using your computer with any model of HP docking station. Use the information in this document to verify that your computer is compatible with the docking station and with the power adapter, to resolve connection issues, and to update device drivers.
HP manufactures a variety of docking station models with various methods for docking and for connecting external devices. The graphics below show two sample models.
In sample one, you dock the computer onto the docking station connector on the docking station. The remaining connections are located on the back and sides of the docking station.
Figure 1: Sample one – Docking station model
In sample two, you dock the computer by sliding it onto a display panel on the docking station. The docking station is connected to the computer using a connector cable located on the back of the display panel. The remaining connections are located on the back and sides of the docking station.
Figure 2: Sample two – Docking station model
If you encounter issues with any HP docking station, try the following solutions.
Make sure that the docking station is compatible with your computer series/model
The computer docking connections located on the bottom of the computer vary between computer models. For the docking station to work properly, the docking posts, eject mechanisms, and electrical connections on the docking station must be compatible with the connections on your computer model.
Figure 3: Docking station connectors
1 - Computer docking mechanisms (posts)
2 - Computer eject mechanisms
3 - Computer connector
Figure 4: Computer connections aligning with docking station connectors
To verify that your computer is compatible with a docking station, do one of the following:
Make sure that the AC power adapter is compatible with the docking station
Power supply requirements vary between computer devices. For example, one docking station might require 90W and another might require 120W. Using an incompatible power adapter can cause the docking station to work improperly. Further, using an incompatible power adapter can damage the docking station power supply, either immediately or over time.
Figure 6: Power adapter, cord, and wall outlet
1 - Power adapter
2 - Power cord
Be sure that you are using the power adapter that came with your docking station. Power adapters and the connectors on many computer devices look similar; however, they are not necessarily interchangeable.
If you are not sure that the adapter is compatible with your computer, refer to the Maintenance and Service Guide for your docking station. For some models, you can find this guide on the HP Support website, using the following instructions:
Make sure that the computer is properly docked
The computer may be properly aligned with the docking station, but it might not be completely docked in the docking station. Make sure that the alignment pins on the docking station align with the holes on the bottom of the computer.
Figure 8: Computer connections aligning with docking station connectors
The docking process varies between different types of docking stations. Typically, docking is a two step process:
Make sure that the cables are connected properly
Make sure that each cable inserted into the docking station and any power connections are securely and properly connected.
Clean the connections
Accumulated dust and particles in or around connectors on the docking station can cause connection problems between the computer, external devices, and the docking station.
Restart the computer
After checking and cleaning the connections, restart the computer. Restarting allows the computer to run its configuration process again and find all of the connections it needs to run properly.
Update the device drivers
In some cases, external devices may not work initially with a docking station. If you have issues with a printer, external speakers, mouse, keyboard, monitor, or other external devices, obtain and install the latest drivers from the manufacturer. To find the latest HP drivers, open the HP Support & Drivers website and type your computer model into the Search box. From the resulting search list, select the update you wish to install.
Update the BIOS
In rare cases, various power-saving modes, such as hibernation or sleep, may not work correctly with all models of docking stations or computers. To resolve this issue, or any issue with a computer failing to resume from a power saving mode, obtain and install the latest version of the BIOS for your computer. To find the latest BIOS, open the HP Support & Drivers website and type your computer model into the Search box. From the resulting search list, select the update you wish to install.