Print | Rate this content

HP 1910 Switch Series - Support for IPv6 Missing in the Web Management Interface


User attempted to configure the 1910 for support of IPv6 routing. Access through the web interface to Network > VLAN Interface > Create allows configuration of a Primary IPv4 Address but not of the corresponding IPv6 Link Local Address.

The option for IPv6 is greyed out. This limitation is despite the fact that the 1910 User Guide covers the set-up and configuration of IPv6 routing in detail.


This issue was discovered in the current software release 5.20 R 1111P01 and was also found in the previous 5.20 Release 1108P01.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!