| | Rate this content |
HP Scanjet - Scan driver and software support for OS X 10.8 (Mountain Lion)ICA driver available for Apple's Image Capture Install the HP Scanjet software to scan in OS X 10.8 (Mountain Lion) Step one: Remove existing HP Scanjet software Step two: Download the HP Scanjet software and updates for OS X 10.6 AND OS X 10.7 Step three: Install HP full feature software for OS X 10.6 (Snow Leopard) IntroductionHP Scanjet Scanners have an ICA driver to enable scanning with Apple's Image Capture application and/or software to enable scanning with the HP Scan application in OS X 10.8 (Mountain Lion). Use this document to find out which Scanjets have drivers and software available, and the recommended steps to install each. ICA driver available for Apple's Image CaptureThe following HP Scanjet models have an ICA driver compatible with OS X 10.8 (Mountain Lion) for use with Apple's Image Capture:
NOTE: The HP Scanjet ICA Software can be used in OS X 10.6 (Snow Leopard), OS X 10.7 (Lion), and OS X 10.8 (Mountain Lion).
To download the HP Scanjet ICA Software, go to www.hp.com/go/support . HP Scan software availableThe following HP Scanjet models have HP Scan software compatible with OS X 10.8 (Mountain Lion).
If your scanner is listed above, continue to the instructions on how to Install the HP Scanjet software to scan in OS X 10.8 (Mountain Lion) . If your scanner is not listed above, you might consider an upgrade to a newer HP scanner that will work with the new Macintosh operating system. For more information, go to the HP Shopping website (http://www.shopping.hp.com). Install the HP Scanjet software to scan in OS X 10.8 (Mountain Lion)To scan in OS X 10.8 (Mountain Lion), use the OS X 10.6 (Snow Leopard) AND the OS X 10.7 (Lion) drivers and software.
NOTE:
Please DO NOT install older software from any HP CD that might have come with the HP Scanjet. Unless the scanner's documentation indicates otherwise, this software is not intended for use on OS X 10.8 (Mountain Lion).
Step one: Remove existing HP Scanjet software
Step two: Download the HP Scanjet software and updates for OS X 10.6 AND OS X 10.7
Step three: Install HP full feature software for OS X 10.6 (Snow Leopard)
NOTE: Installing HP software for OS X 10.6 (Snow Leopard) is required to ensure that all of the latest fixes and updates are installed before installing the HP Scanjet update for Mac OS X 10.7.
Step four: Install HP Scanjet update for OS X 10.7 (Lion)
Troubleshooting error messages received during installationWhen you try to install older software released prior to Mountain Lion, you might receive the following error message:
If you receive this message, follow these steps:
If you continue to receive this message, you can also choose to override your security settings by disabling Gatekeeper. To do this, follow these steps:
|
Provide feedback |
| Please rate the information on this page to help us improve our content. Thank you! |
- Was the information on this page helpful?
- Very helpful
- Somewhat helpful
- Not helpful

) in the lower left corner to make changes to Security & Privacy settings.
) in the lower left corner to save the changes.