Print | Rate this content

HP A-Series (H3C and 3COM) Switches -"Configuring Hybrid Ports for IP Phones" (Single interface for Data and Voice Vlan's)

Information

A user wants to know how to use the ports for Data and Voice.

Details

As listed below:


OPT Case ID : 4691775343
Status : Closed
Customer : Wipro Infotech.
Issue : Configuration assistance
Product : A-Series
Description : Customer wants to know "How to Configure Hybrid Ports for IP Phones" on H3C and 3COM switches.

Creating Hybrid Ports for IP Phones

Hybrid Ports:

  • Belongs to multiple VLAN.

  • Multiple VLANs can be untagged and tagged.

  • Typically used for IP Phones connection.

  • Also in conjunction with Protocols VLAN, IP Subnet VLANs.

Example config:

Hybrid ports can be assigned to multiple VLAN as tagged or untagged.

Set Hybrid ports using a Port Group:


[SW]port-group manual phones-1
[SW-port-group-manual-phones-1]group-member gi1/0/11 to gi1/0/20
[SW-port-group-manual-phones-1]port link-type hybrid

Set Data VLAN 100 as the Native VLAN:

[SW-port-group-manual-phones-1]port hybrid PVID 100

NOTE: Hybrid port is still part of VLAN 1. Then Remove hybrid port from VLAN 1.

[SW-port-group-manual-phones-1]undo port hybrid vlan1 untagged

Set VLAN 200 as Voice VLAN:

Makes VLAN tagged on port and auto-qosif Phone SNMP OUI Is detected.

[SW-port-group-manual-phones-1]voice vlan200 enable

List Hybrid Ports:


[SW-A]display port hybrid
Interface PVID VLAN passing
GE1/0/11 100 Tagged: 200 Untagged:100
GE1/0/12 100 Tagged: 200 Untagged:100 ... (skip display)


[SW-1]display current-configuration interface gi1/0/11

interface GigabitEthernet1/0/11
port link-type hybrid
port hybrid vlan200 tagged
port hybrid vlan100 untagged
port hybrid PVID 100
undo port hybrid vlan1 untagged

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!