Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise .

F10 Setup and Personal Computer Diagnostics

By downloading, you agree to the terms and conditions of the HP Software License Agreement.
Note:  Some software requires a valid warranty, current HP support contract, or a license fee.

Type: Firmware
Version: 1.23 A(11 Oct 1997)
Operating System(s): Microsoft MS-DOS
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows NT 3.51
Microsoft Windows 3.1
Microsoft Windows 2000
Microsoft Windows NT 4.0
File name: sp4705.exe (2.1 MB)
This software puts together in one package the programs that help you configure a Compaq personal computer and the programs that test the computer and report the identity and settings of its components. The F10 Setup software involves configuration, security and power management, while the Diagnostic software focuses on testing and analysis of the state of the computer and its devices. A version of the programs is shipped on the system partition of your computer's hard disk. This software upgrades the software that resides there.
SOFTPAQ NUMBER:  SP4705
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Computer SETUP/V and PC Diagnostics  
VERSION:  1.23 Rev A for Computer Setup/V
  10.19 Rev A for PC Diagnostics 
LANGUAGE:  Italian

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED: Compaq Deskpro, Deskpro 2000 Series,
ProLinea Series, and most models of the ProLinea/e Series
NOTE:  Not for use with Compaq Deskpro 2000MMX, 4000 Series,
Deskpro 6000 Series, ProLinea 6150e, and ProLinea 6180e

OPERATING SYSTEM: N/A

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: 01 Sept 1997

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: SP2582

DESCRIPTION:
Creates two diskettes:
- Computer Setup/V Version 1.23 Rev A 
- Personal Computer Diagnostics Version 10.19 Rev C
These related utilities were formerly in two separate SoftPaqs.

Computer Setup and PC Diagnostics are both pre-installed on the 
Diagnostics Partition.  The diskettes in this SoftPaq can be used to 
update these utilities on the Diagnostics Partition or to restore them 
if the Diagnostics Partition has been destroyed.   Both utilities can be 
run by pressing F10 when the cursor moves to the upper right corner of 
the screen during power-up or reboot.  Or they can be run directly from 
these diskettes.  

Computer Setup allows the user to configure security and power 
management settings as well as system resources (DMA, IRQ, I/O Ports, 
and Memory).

A Compaq Personal Computer Diagnostics diskette contains programs that can...
   - TEST both Compaq EISA and ISA machines from the Desktop and Portable
     Divisions.
   - INSPECT (display machine config) both Compaq EISA and ISA machines
     from the Desktop and Portable Divisions.

FIXES:
   - Setup no longer locks up after configuring IBM PCI 5250 and 3270 PCI 
     emulation boards.
   - Setup now shows correct PCI board names instead of "Invalid Class".
     Adds the "other communication device" class definition to the list of 
     PCI boards. 
   - Fixes issues with the date/time fields:
       - Adds Cancel button
       - Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
       - Corrects keyboard activation letters

ENHANCEMENTS:
   - Setup diskette includes the latest Diagnostic files (10.19.A2).

HOW TO USE:

1. Obtain two (2) formatted 1.44-MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.
Label them as follows:
First Diskette -- Computer Setup/V Version 1.23 A
Second Diskette -- Personal Computer Diagnostics Version 10.19 Rev A

4. After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5.  To install Computer Setup/V on the Diagnostics Partition, or to run 
it directly from the diskettes, power down your computer, place the 
first diskette created in Drive A:, power up your computer, and follow 
the on-screen menu.

6. To install Personal Computer Diagnostics on the Diagnostics 
Partition, or to run it directly from the diskettes, power down your 
computer, place the second diskette created in Drive A:, power up your 
computer, and follow the on-screen menu.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies

Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).

Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)

Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Firmware
Version: 1.23 A(11 Oct 1997)
Operating System(s):
Microsoft MS-DOS
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows NT 3.51
Microsoft Windows 3.1
Microsoft Windows 2000
Microsoft Windows NT 4.0

Description

This software puts together in one package the programs that help you configure a Compaq personal computer and the programs that test the computer and report the identity and settings of its components. The F10 Setup software involves configuration, security and power management, while the Diagnostic software focuses on testing and analysis of the state of the computer and its devices. A version of the programs is shipped on the system partition of your computer's hard disk. This software upgrades the software that resides there.

Release Notes

SOFTPAQ NUMBER:  SP4705
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Computer SETUP/V and PC Diagnostics  
VERSION:  1.23 Rev A for Computer Setup/V
  10.19 Rev A for PC Diagnostics 
LANGUAGE:  Italian

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED: Compaq Deskpro, Deskpro 2000 Series,
ProLinea Series, and most models of the ProLinea/e Series
NOTE:  Not for use with Compaq Deskpro 2000MMX, 4000 Series,
Deskpro 6000 Series, ProLinea 6150e, and ProLinea 6180e

OPERATING SYSTEM: N/A

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: 01 Sept 1997

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: SP2582

DESCRIPTION:
Creates two diskettes:
- Computer Setup/V Version 1.23 Rev A 
- Personal Computer Diagnostics Version 10.19 Rev C
These related utilities were formerly in two separate SoftPaqs.

Computer Setup and PC Diagnostics are both pre-installed on the 
Diagnostics Partition.  The diskettes in this SoftPaq can be used to 
update these utilities on the Diagnostics Partition or to restore them 
if the Diagnostics Partition has been destroyed.   Both utilities can be 
run by pressing F10 when the cursor moves to the upper right corner of 
the screen during power-up or reboot.  Or they can be run directly from 
these diskettes.  

Computer Setup allows the user to configure security and power 
management settings as well as system resources (DMA, IRQ, I/O Ports, 
and Memory).

A Compaq Personal Computer Diagnostics diskette contains programs that can...
   - TEST both Compaq EISA and ISA machines from the Desktop and Portable
     Divisions.
   - INSPECT (display machine config) both Compaq EISA and ISA machines
     from the Desktop and Portable Divisions.

FIXES:
   - Setup no longer locks up after configuring IBM PCI 5250 and 3270 PCI 
     emulation boards.
   - Setup now shows correct PCI board names instead of "Invalid Class".
     Adds the "other communication device" class definition to the list of 
     PCI boards. 
   - Fixes issues with the date/time fields:
       - Adds Cancel button
       - Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
       - Corrects keyboard activation letters

ENHANCEMENTS:
   - Setup diskette includes the latest Diagnostic files (10.19.A2).

HOW TO USE:

1. Obtain two (2) formatted 1.44-MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.
Label them as follows:
First Diskette -- Computer Setup/V Version 1.23 A
Second Diskette -- Personal Computer Diagnostics Version 10.19 Rev A

4. After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5.  To install Computer Setup/V on the Diagnostics Partition, or to run 
it directly from the diskettes, power down your computer, place the 
first diskette created in Drive A:, power up your computer, and follow 
the on-screen menu.

6. To install Personal Computer Diagnostics on the Diagnostics 
Partition, or to run it directly from the diskettes, power down your 
computer, place the second diskette created in Drive A:, power up your 
computer, and follow the on-screen menu.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies

Fixes

Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).

Revision History

Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.23 A (11 Oct 1997)
Fixes
Corrects a condition where Setup would lock up after configuring IBM PCI 5250 and 3270 PCI emulation boards.

Corrects a condition where Setup now shows correct PCI board names instead of "Invalid Class."

Corrects date/time field issues:

  • Adds cancel button.
  • Adds date/time button for French, German, Spanish, Dutch, and Portuguese.
  • Corrects keyboard activation letters.

Corrects a condition where Setup diskette now includes the latest Diagnostic files (10.19.A2).


Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)
Version:1.20 A (4 Dec 1996)