Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise .

DeskJet 840C, 841C, 842C and 843C Printer Driver

By downloading, you agree to the terms and conditions of the HP Software License Agreement.
Note:  Some software requires a valid warranty, current HP support contract, or a license fee.

Type: Driver - Product Installation Software
Version: 12.1(29 Feb 2000)
Operating System(s): Microsoft Windows 3.11
File name: dj833en.exe (2.1 MB)

The HP DeskJet 840C Series Printer Driver

supports HP DeskJet 840C, 842C and 843C printers
It should be used on computers that are directly connected to the printer from the computer's parallel port. This driver includes the Printer Driver, Uninstaller, and the HP Toolbox.
Installation Instructions:

Download:
Save this file to your hard disk and double-click on the exe file. This will create sub-directories. Setup.exe is under the \disk1 directory. In the Program Manager, select File => Run \disk1 and run SETUP.EXE

From Floppy Disks:
Windows 3.1x - Insert Disk 1 into your floppy disk drive. From Program Manager choose File, then Run. Type "A:\setup.exe". Follow the instructions on the screen.

Version:12.1 (29 Feb 2000)

Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Driver - Product Installation Software
Version: 12.1(29 Feb 2000)
Operating System(s):
Microsoft Windows 3.11

Description

The HP DeskJet 840C Series Printer Driver

supports HP DeskJet 840C, 842C and 843C printers
It should be used on computers that are directly connected to the printer from the computer's parallel port. This driver includes the Printer Driver, Uninstaller, and the HP Toolbox.
Installation Instructions:

Download:
Save this file to your hard disk and double-click on the exe file. This will create sub-directories. Setup.exe is under the \disk1 directory. In the Program Manager, select File => Run \disk1 and run SETUP.EXE

From Floppy Disks:
Windows 3.1x - Insert Disk 1 into your floppy disk drive. From Program Manager choose File, then Run. Type "A:\setup.exe". Follow the instructions on the screen.

Revision History

Version:12.1 (29 Feb 2000)