Contracts & warranties

Help index

Overview

Use the Contracts & warranties area to manage:

  • Support agreements
  • HP Care Packs
  • Warranties

You get these contracts and warranties* from:

  • The HP contracts division
  • An HP-approved third party

Your HP Passport ID must be linked to each contract or warranty. Each type has a different identifier as described below. You can link up to 20 contracts and warranties at a time interactively, or up to 2500 at a time using the Batch link tool.

When your HP Passport ID is linked, you can:

  • Access services and related support specific to particular contracts or warranties.
  • Share your contracts and warranties with other users.

* In this document, "contracts and warranties" includes support agreements, HP Care Packs, and warranties.

Return to index

Use the right identifier: SAID, SAR, HP Care Pack, Warranty

Be sure to use the right identifier when entering contract information:

Contract type Use this identifier Description Example
Support agreement Service Agreement
ID (SAID)

A unique 12-digit numeric sequence.

Provided with your support documentation.

210987654321
Support agreement Support Account
Reference (SAR)

A combination of numbers and letters, with no special characters.

Case sensitive.

Provided with your support documentation.

Also referred to as a system handle.

Note: You need an SAID and an SAR to link a support agreement.

ABc12345xyz
HP Care Pack HP Care Pack
serial number

A combination of numbers and capital letters, with no special characters.

Provided with your support documentation.

A1B2C3D4E5

To link to a contract or warranty, you need your HP Passport ID and the following information:

Contract or warranty type Identifier Required additional information
Support agreement SAID SAR
HP Care Pack HP Care Pack serial number HP Care Pack product number *, country of purchase
Warranty Warranty serial number Warranty product number *, country of purchase

* The product number(s) of the products covered by the HP Care Pack or warranty.

The table below lists the location of the required information:

Required information Where to find
SAID B, C, D
SAR B, C, D
HP Care Pack serial number B, C
Warranty serial number A, B, D
HP Care Pack product number B, D
Warranty product number A, B
  1. On the product itself.
  2. On the support documentation.
  3. At the HP Electronic Support Contract Assistant website.
  4. On the customer cover letter that describes the contract or warranty.

When creating a link, select an ownership type:

  • Single
  • Multiple

Owners can:

  • Create contract and warranty shares (though in the case of multiple owners, there is no need to).
  • Transfer ownership.
  • Change the nickname.
  • Change the ownership type.

You do not need to be an owner to have access to the features provided by a contract or warranty. As a member of a user group associated with a contract and warranty share , you have access to features that were associated with the user group by the share . See Manage contract & warranty shares.

Link support agreements

Link to a support agreement to access feature services such as:

  • Specific agreements for Service Credits
  • Certain technical documents

Enter the following information in Enter linking information:

  • SAID
  • SAR
  • Ownership type (single or multiple)

Click Submit.

If an error appears stating the support agreement is already linked to someone else, contact that owner to get access. This may be the result of the owner selecting single ownership.

Return to index

Link HP Care Packs

Enter the following information in Enter linking information:

  • HP Care Pack ID.
  • The product of the product covered by the HP Care Pack.
  • Country in which you purchased the HP Care Pack (select from the drop-down menu).
  • Nickname. Provide a name that has meaning to you.
  • Ownership type (single or multiple).

If an error appears stating the support agreement is already linked to someone else, contact that owner to get access. This may be the result of the owner selecting single ownership.

Return to index

Link warranties

Enter the following information in Enter linking information:

  • Warranty serial number.
  • Product number of the product covered by the warranty. This is typically near the serial number.
  • Country in which you purchased the product (select from the drop-down menu).
  • Nickname. Provide a name that has meaning to you.
  • Ownership type (single or multiple).

If an error appears stating the support agreement is already linked to someone else, contact that owner to get access. This may be the result of the owner selecting single ownership.

Return to index

Batch link tool

The Batch link tool allows you to link up to 2500 contracts and warranties to your HP Passport ID in a single operation. From the main Contracts and warranties page, click Batch link tool either in the Actions dropdown menu or on the page itself.

Follow the steps listed on the upload page:

  • Download the latest Microsoft Excel template file from the link in Step 1. The format of the template name is "name-date_version", where the date is represented as YYYY-MM-DD.
  • Read the detailed instructions in the Readme sheet of the template.
  • Enter information, one contract or warranty per line, according to the titles at the top of each column. Enter a maximum of 2500 lines, for each instance of the template you create. Note that some of the fields are optional.
  • Do a "Save as", to comma-separated value (CSV) format. (Select CSV (Comma delimited) (*.csv) option only from "Save as type" in Excel.) The result is a plain text file containing the entries from the spreadsheet, with each field on each line separated by a comma.
  • Optionally, update your user name and e-mail display option. Select "Yes" to allow other users to see your user name and email address when they view these contracts and warranties, or select "No" to keep this information private.
  • Check the boxes to verify that you have selected the most recent template, and that you have a CSV file.
  • Navigate to the CSV file on your local computer, then click Upload.

CSV file requirements and limits

The file name must have an extension of .csv. File maximums:

  • Name length: 50 characters
  • Size: 5 MB
  • Number of lines: 2500

After you upload the CSV file, a popup window appears. Click the Close button. An initial file check occurs verifying that the file size is within limits and has the correct file extension. If this file check succeeds, the batch upload summary page displays. The batch upload summary page lists the upload date and status, and a link to a report file, for each CSV file you have uploaded. Click a report file link to view the report, which contains details about the upload. You can also save the report file. The default sort for the list is by date. Click the Status or Report file headings to sort by those fields instead. Status values for each uploaded batch file in the list are as follows:

  • Completed.
  • Completed with errors. See the report file for details.
  • Invalid file format. The file was not recognized as a valid CSV file.
  • File exceeds limit. The file was longer than 2500 lines or greater than 5 MB.
  • Pending. Files that have been received and have not completed processing. A maximum of two uploads can be pending.
  • System error. The file itself may be fine. Try uploading again later.

Normally you export from the downloaded template and "save as", and do not need to edit or even look at the CSV file. There may be cases however, such as if an invalid file format error occurs and you suspect that the file may be corrupt, where it is useful to inspect the file.

Each field in the CSV file must contain a value unless otherwise indicated below. The CSV fields in order are as follows:

  1. One of:
    • SAID
    • HP Care Pack ID
    • Warranty serial number
  2. The product number of the product covered by the HP Care Pack or by the warranty, if the obligation type is HP Care Pack or Warranty.
  3. SAR, if the obligation type is Support Agreement.
  4. Obligation Type. One of:
    • Support Agreement
    • HP Care Pack
    • Warranty
  5. Country, if the obligation type is HP Care Pack or warranty.
  6. Ownership Model: Multiple or Single.
  7. Nickname. Optional. You can add a nickname for an HP Care Pack or warranty. SAIDs have predefined nicknames, added at the time of signing the contract.

The following is a valid sample line for a warranty, from a CSV file. In this example, double commas surround an empty optional field. The third field, SAR, is empty because a warranty does not need an SAR:

XY08K33099,SP936UC,,Warranty,France,SINGLE,WarrantyNickName1

Each line should contain at least six commas. Additional commas at the end of the line, which may occur if any text, even a space, was in the seventh column of the template file you exported from, are ignored.

Report files list the processing result of each line including entries that were not able to be processed, typically for the following reasons:

  • A support agreement was inactive or was in single ownership mode.
  • A warranty was inactive or was migrated to an Uplifted Care Pack.
  • An HP Care Pack was inactive, was in single ownership mode, or was uplifted to a Support Agreement.

You should address these cases individually, by reactivating or by changing the ownership mode to multiple. Once you have done so you can then resubmit a file containing these entries for batch processing, or depending on their number, simply link them interactively.

Return to index

View my contracts & warranties

Lists the contracts and warranties you own, either as a single or multiple owner, or which are shared with you. Use the "View" dropdown to filter by active, expired, expired within 30 days, expiring within 31 days to 1 year. Use the "Ownership type" to filter by single, multiple or all. Use "Search by" to find an SAID, SAR, serial number or product number.

To see a list of users linked to the contract or warranty, click on the individual ID, then the Users tab. For single-owner contracts and warranties, you can see all users within a share that includes this specific item. For multiple-owner contracts & warranties, you can see who the other owners are, if they have opted in.

Return to index

Edit my contracts & warranties

Change the nickname and ownership type from this page. Use "Search by" to find an SAID, SAR, serial number or product number. Use the "View" and "Ownership type" dropdowns to filter the display.

Return to index

Manage contract & warranty shares

You can organize contracts and warranties into logical groups by creating contract and warranty shares. To create a new share:

  1. Name the share. Provide a description. Add contracts and warranties.
  2. Select one or more existing user groups or create new ones.
  3. Assign roles and feature services (listed below) to the selected user groups. Assign the admin role to the first user group.
  4. Confirm and submit.

You must assign the first user group you add in Step 3 the role of share admin, because at least one user group must have that role. Select the "Contract and warranty share administrator" checkbox. You can change this later, as long as one user group has the admin role.

The table below lists the differences between a share admin and a share member.

Task Share admin Share member
Can add to and remove contracts from the share
Can delete the share
Can view contracts in the share
Can add and remove user groups associated with the share
Can view admins of the share
Can view members of the share

Though it is not a necessary step in creating a contract and warranty share, if you need to edit associated user groups you can do so before, during, or after the process of creating the share:

  1. Select Manage user groups from the Contract & warranties menu. User groups that you are an admin of will be listed.
  2. Click on Edit user group in the actions menu of the specific user group, at the far right.

Return to index

Transfer ownership

The result of the this action depends on the ownership type:

Ownership type Result
Single You transfer ownership to a different user with a valid HP Passport ID, by entering that user's email address.
Your account is unlinked from the contract or warranty. The contract or warranty will be removed from any share you own.
Multiple You replace your link to the contract or warranty with a link to another user's account.
Links to the contract or warranty from other users are not affected.

Return to index

Unlink contracts and warranties

Unlink single or multiple items at one time by checking the box below the "Unlink" column and submitting.

If a contract or warranty you are linked to with single ownership is also part of a share, consider transferring ownership before unlinking it from your account. If you do not, the share will be removed as well, and those users will lose their access to the services provided by that contract or warranty.

Return to index