Jump to content
HP Support Center
Content starts here
View Download options menu View Knowledge Base menu View Parts, Repair & Warranty menu View Get help from HP menu

Drivers, Software and Firmware for HP Officejet J3600 All-in-One Printer series

Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts. Only receive updates on products you specify or own when you want them.

HP Officejet Software and Driver Removal Utility

By downloading, you agree to the terms and conditions of the HP Software License Agreement.
Type:Utility - Diagnostic Tools
Version:13.0.0 (15 Jan 2010)
Operating System(s):Microsoft Windows 7 Home Basic (32-bit), Microsoft Windows 7 Home Premium (32-bit), Microsoft Windows 7 Professional (32-bit), Microsoft Windows 7 Enterprise (32-bit), Microsoft Windows 7 Ultimate (32-bit), Microsoft Windows 7 Starter (32-bit), Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Enterprise (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
File name:OJJ3600_Scrubber_13.exe (2.9 MB)
These downloads are available for customers according to the terms in the HP Software License Agreement. Certain software may require a valid warranty, current support contract with HP, or a license fee.
This Software and Driver Removal Utility is intended for users to remove the HP software from their system.

If problems arise while installing or uninstalling the HP software, download this removal utility to uninstall the software before attempting reinstallation.

IMPORTANT NOTE: This utility removes only version 13.0.0 of the driver. Running the removal utility may remove the drivers and software for other HP printing, scanning or digital imaging products.
This utility (uninstall.bat) works in stages. The first time the utility is used, it runs at level one. The next time the utility is used, it runs at level two. There are four levels. The effects of each level are shown in the table below.

Uninstaller level Description
Level 1: Removes the Windows device discovery (Plug and Play) entries from the Windows registry. After running level 1, connect the USB cable to the all-in-one and let Windows try to discover the device again.
Level 2: (Performs Level 1) Removes the software drivers. After running level 2, run the all-in-one installer and use the ""Add a new device"" option to attempt to reinstall the all-in-one again.
Level 3: (Performs Levels 1 and 2) Removes the HP Photo and Imaging software. You must completely reinstall the all-in-one software after running level 3.
Level 4: (Performs Levels 1, 2 and 3) Removes HP Software Update. You must completely reinstall the all-in-one software after running level 4.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Was the information on this page helpful to find what you were looking for?
Very helpful
Somewhat helpful
Not helpful